Gravity Diecasting unit in Gurgaon.

PRECICAST

Gravity Diecasting Unit in Gurgaon
Gravity DieCasting

Our Gravity Diecasting - Precicast is a joint venture between SRS Diecasting & Solo Components Pvt. Ltd. both, ISO:TS:16949-2002 certified companies.
 
RESOURCE BANK

•

 MELTING FURNACE 180 Kg Crucible capacity
• TRANSFERRING LADLE 80 Kg capacity
• HOLDING FURNACE 180 Kg Crucible capacity
• MOBILE DEGASSING UNIT  
• GRAVITY DIE CASTING MACHINE DOUBLE DIE LOADING
• AIR COMPRESSOR  
• POWER BACK UP DG 62 kVA
• BAND SAW  
• IN HOUSE TOOL ROOM  

 

1.

Oil fired Separate melting furnace for controlling charging ratio

We have a Separate melting furnace to ensure molten metal has optimum - temperature, quality and composition. After the melt is prepared we transfer it to a holding furnace through a pre heated crucible. At the time of pouring the metal into the holding furnace the metal is filtered through a ceramic mesh filter.
 

Melting Furnace

gravity diacasting, gravity die casting, unit in gurgaon
2.

Electric Holding Furnace for temperature control within ± 10 ° C

All treatment is done in a crucible type holding furnace; the furnace has been designed to achieve a metal temperature range of plus minus 10 degree C.

Holding Furnace

gravity diacasting, gravity die casting, unit in gurgaon
3.

Rotary Degassing machine for Effective Degassing

After the metal is transferred degassing of the melt is done. During this process we pass fine bubbles of Nitrogen at the base and allow them to pass homogenously through the melt. As the gas bubbles pass they by virtue of partial pressure theory collect hydrogen and oxide inclusion and bring it to the surface of the metal. This unclean metal is separated by specially designed sieves.

Mobile Degassing Unit

gravity diacasting, gravity die casting, unit in gurgaon
4.

Band saw for Gate cutting

Our Band saw has a continuous steel blade driven around two pulleys. The saw is used for gate and runner cutting.

Band Saw

gravity diacasting, gravity die casting, unit in gurgaon
gravity diacasting, gravity die casting, unit in gurgaon
All our tools are developed in house through computer simulation of Gating Designs depending on specific casting requirements

We have a fully equipped tool room and design office for the development of dies. This includes
» Solidworks for CAD including solid modeling.
» Delcam for CAM i.e. tool path generation
» Diedifice for optimizing the runner and gate design and thermal analysis of PDC dies.
» Has CNC milling machine with 1000 rpm spindle for machining of die inserts

We understand as the specification of gravity diecast components and quality requirements increases it is essential that the processes and consumable products that form the basis of the casting process develop to fulfill the end use requirements and thus our focus is on improved performance by delivering quality gravity cast components, whist reducing overall costs of the foundry.
 

   D-46 HSIDC Shed, Udyog Vihar, Sector 37, Gurgaon, Haryana
                      Phones : [91] [0124] 4035328,
                      E-mail  : precicast@airtelbroadband.in
                      Mobile  : Nimit Nahar: 91 98992-90882,

                  Satbir Singh: 91 98992-61679

©2006 Precicast, All rights reserved
Gravity Diecasting unit in Gurgaon